Manufacturer of 2×2 Aluminum - 7A04-H112 Aluminum Alloy – Jinding Aluminium

Short Description:

Custom Solution Guoxin is a stock company in China, making 1000 series to 7000 series aluminum alloy rods, Aluminum Alloy Rods, and aluminum alloy profiles, please tell us your needs like aluminum alloy grade, specifications and heat treatment of this 7000 series aluminum alloy, our company can provide custom aluminum alloy process solutions in your demands. Our Aluminum Extrusion Press, used for making Aluminum Alloy Rod and Bar with diameters as follows: Equipment Products Diameter 10...


Product Detail

Product Tags

Related Video

Feedback (2)

During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Aluminium Tube , 6063 Aluminum Pipe And Tubes , Aluminium Wire Rod , Any needs from you'll be paid out with our best notice!
Manufacturer of 2×2 Aluminum - 7A04-H112 Aluminum Alloy – Jinding Aluminium Detail:

Custom Solution
Guoxin is a stock company in China, making 1000 series to 7000 series aluminum alloy rods, Aluminum Alloy Rods, and aluminum alloy profiles, please tell us your needs like aluminum alloy grade, specifications and heat treatment of this 7000 series aluminum alloy, our company can provide custom aluminum alloy process solutions in your demands.

Our Aluminum Extrusion Press, used for making Aluminum Alloy Rod and Bar with diameters as follows:

Equipment Products Diameter
100MN double action direct extrusion press Aluminum Alloy Rod and Bar 134-410mm
55MN double action indirect extrusion press Aluminum Alloy Rod and Bar 102-162mm
36MN single action direct extrusion press Aluminum Alloy Rod and Bar 64-113mm
28MN double action indirect extrusion press Aluminum Alloy Rod and Bar 25-92mm
2600UST single action direct extrusion press Aluminum Alloy Rod and Bar 43-82mm
2100UST single action direct extrusion press Aluminum Alloy Rod and Bar 15-65mm
1100UST double action direct extrusion press Aluminum Alloy Rod and Bar 22-46mm
 
 Our Recommend Aluminum Alloy Products

7075 Aluminum Alloy Rod
7075 aluminum alloy is for fabricating aircraft frame, molds, and high-stress structural parts with high strength and corrosion resistance.

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Others
7075 Aluminum Alloy 0.40 0.50 1.2-2.0 0.30 2.1-2.9 0.18-0.28 5.1-6.1 0.2 single: 0.05; total: 0.15
Alloy Mechanical and physical properties
tensile strength (25°C) (MPa) yield strength (25°c) (MPa) hardness 500kg 10mm elongation 1.6mm(1/16in) thickness max shear stress (MPa)
7075-T651 Aluminum Alloy 572 503 150 11 /
weldability machinability corrosion resistance electricity conductivity 20℃(68℉) (%IACS) density
(20℃)(g/cm3)
/ / / / 2.82

The Recommend Products also as follows

Aluminum Alloy Products Applications
7050 Aluminum Alloy Rod 7050 aluminum alloy is for making aircraft structural parts such as thick aluminum alloy plates, extrusion parts, custom shaped forgings and die forgings. This kind of aluminum alloy has high resistance to corrosion, resistance to stress corrosion cracking, and fatigue resistance, as well as high fracture toughness.
7A04 Aluminum Alloy Rod 7A04 aluminum alloy is for making aircraft skin, screws, and heavy load structural parts like beam girder, frame, wing ribs, alighting gear, etc.

Guoxin can offer 7000 Series Aluminum Alloy Rods as follows:
7075 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7075 Aluminum Alloy 0.4 0.5 1.2~2.0 0.3 2.1~2.9 0.18~0.28 5.1~6.1 0.2 the rest part

7A04 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7A04 Aluminum Alloy 0.5 0.5 1.4~2.0 0.2~0.6 1.8~2.8 0.1~0.25 5.0~7.0 0.1 the rest part

7005 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7005 Aluminum Alloy 0.35 0.4 0.1 0.2~0.7 1.0~1.8 4.0~5.0 0.01~0.06 the rest part

7039 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7039 Aluminum Alloy 0.3 0.4 0.1 0.1~0.4 2.3~3.3 0.15~0.25 3.5~4.5 the rest part

7049 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7049 Aluminum Alloy 0.4 0.5 1.2~1.9 0.5 2.1~3.1 0.05~0.25 7.2~8.4 the rest part

7072 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7072 Aluminum Alloy 0.35 0.4 0.2 0.05~0.5 1~1.4 0.1~0.35 4~5 the rest part

7175 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7175 Aluminum Alloy 0.15 0.2 1.2~2.0 0.1 2.1~2.9 0.18~0.28 5.1~6.1 0.1 the rest part

7178 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7178 Aluminum Alloy 0.4 0.5 0.6~2.4 0.3 2.4~3.1 0.18~0.28 6.3~7.3 0.2 the rest part

7475 Aluminum Alloy Rod

Alloy Major alloying element (mass fraction) (%)
Si Fe Cu Mn Mg Cr Zn Ti Al
7475 Aluminum Alloy 0.1 0.12 1.2~1.9 0.06 1.9~2.6 0.18~0.25 5.2~6.2 0.06 the rest part

Product detail pictures:

Manufacturer of 2×2 Aluminum -
 7A04-H112 Aluminum Alloy – Jinding Aluminium detail pictures

Manufacturer of 2×2 Aluminum -
 7A04-H112 Aluminum Alloy – Jinding Aluminium detail pictures


Related Product Guide:
Aluminium Welding Wire Consumption Market Report – Industry Analysis, Forecast, Size upto 2025 | Aluminium Tube 5083
About Aluminium International Today | Black Anodized Aluminum Tubing

Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Manufacturer of 2×2 Aluminum - 7A04-H112 Aluminum Alloy – Jinding Aluminium, The product will supply to all over the world, such as: Jakarta , Saudi Arabia , Uruguay , For more than ten years experience in this filed, our company has gained high reputation from home and abroad. So we welcome friends from all over the world to come and contact us, not only for business, but also for friendship.
  • This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Dawn from Jamaica - 2016.11.20 15:58
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Penny from Sheffield - 2015.06.03 10:17
    WhatsApp Online Chat !